被公侵犯玩弄漂亮人妻,韩国公妇里乱片A片中文字幕,被老头玩弄的漂亮人妻

<var id="8j5ox"><big id="8j5ox"></big></var>

  1. <th id="8j5ox"></th>

    <span id="8j5ox"></span>
    • 電話:0531-87199680
    • 傳真:0531-87119680
    • 銷售熱線:400-685-1687
    • 地址:濟南市104國道邵西
    • 潤鑫工業園
    新聞中心當前位置:首頁-新聞中心
      母線加工機提高了工作效率

          母線加工機主要符合于上下壓開關櫥子、變壓器制造行業,用于加工各種型號的銅、鋁母線。用戶只需在相應的加工單位上,即可分別停止母線的沖、剪、折加工,消費效率高。電器櫥子定期肅清積塵,堅持清潔,可用吹氣或擦除辦法。隨時留意并保證各銜接件的固定螺釘鎖緊,各組件的銜接端子能否鎖緊,以避免接觸不良,產生誤動作或毛病。確保電纜的彎曲度,以防電線折斷。
      Busbar processing machine mainly correspond fluctuation pressure switch cabinet, transformer manufacturing industry, used for processing various types of copper, aluminum bus bar. On the corresponding processing units, users only need to stop the bus rushed, shears, folding processing, consumption of high efficiency. Electrical cabinets regularly clean up dust, insist on clean, usable blowing or erased. Always pay attention to and we can ensure the screw locking of the cohesion, cohesion of the items constituting the terminal can lock, in order to avoid poor contact, produce misoperation or problems. Ensure that the curvature of the cable to prevent wire broken.
      1、割開單位采用通用的雙刀式割開,剪口平整,無毛刺。
      Cut unit adopts the general double pole type 1, cut, cut the mouth level off, without burr.
      2、沖孔單位采用搞精度五臂沖孔模架,延長了模具的運用壽命。使用視野愈加明晰, 母線加工機運用愈加便當快捷,無需改換模具消費效率明顯高于傳統沖孔單位。
      2, punching unit adopts precision punching die set five arms, extend the service life of the mold use. Using vision clearer, busbar processing machine use more quick lunch, don't need to change mould consumption efficiency is significantly higher than the traditional punching units.
      3、掛勾式敞開折彎工位 使用簡雙方便 可加工特殊回形 小折彎、壓花、立彎等。
      3, open hook type bending location Both sides will use Jane Machinable special back into shape Small bending, embossing, bending, etc.
      4、折彎單位采用臥式加工,在加工時更平安便當。
      4, bending unit adopts horizontal machining, the machining more peace when lunch.
      5、機器的三個工作工位能夠同時工作,互不影響,大大進步了工作效率。
      5, three of the machine working station can work at the same time, mutual influence, greatly improved work efficiency.
      6、每個加工單位的工作行程均可便當地調理,減少加工輔助時間、進步消費效率。
      6, each processing unit of the working stroke are local control, reduce the processing time, advance consumption efficiency.
      7、液壓油箱采用厚鋼板焊接,并作了磷化處置,使液壓油長期運用不會蛻變。
      7, the hydraulic oil tank is made of thick steel plate welding, and the phosphating treatment, make the hydraulic oil used for a long time will not change.
      8、液壓膠管采用國標A型銜接方式,即耐用而便當維修。
      8, hydraulic hose used gb type A cohesive ties, durable and lunch service.
      9、母線加工機器上將有腳輪,能夠便當的挪動
      9 will be castor, busbar processing machine, move to lunch
    被公侵犯玩弄漂亮人妻,韩国公妇里乱片A片中文字幕,被老头玩弄的漂亮人妻